System Commands This section contains commands for managing the system. Child Topicsabort_upgradeStop an upgrade that is in process. add_certificateAdd a Certificate Authority (CA) signed certificate to the CLI’s Trusted Certificates list. All applied certificates signed by the CA will be trusted automatically by this CLI. add_standby_mdmAdd a standby MDM to the system. allow_commands_during_upgradeAllows cluster commands to be sent during an upgrade for this session. approve_all_mdm_certificatesApprove all MDM cluster certificates. create_mdm_clusterCreate an MDM cluster from the selected Master MDM. enter_maintenance_modePlace one or more SDSs in maintenance mode. exit_maintenance_modeCancel maintenance mode for one or more SDSs. finalize_upgradeFinalize the upgrade process. generate_certificateGenerate a new certificate and private key for the SDS or SDR. The certificate and key are signed by the system. generate_mdm_certificateCreate a new self-signed certificate and private key for the specfied MDM. generate_mdm_csr_fileCreate a CSR (Certificate Signing Request) file for the specified MDM. modify_cluster_virtual_ipsSet or modify the virtual IP address of an MDM cluster. modify_management_ipModify an MDM node’s management IP addresses. modify_spare_policyModify the current spare capacity reservation policy. modify_virtual_ip_interfacesSet the virtual IP interfaces of a node in the MDM cluster. query_allRetrieve aggregated information about all objects in all Protection Domains. query_clusterRetrieve MDM cluster information. query_performance_parametersRetrieve performance parameters. The output displays the configurations of performance-related parameters for the performance profile that is currently active. When no parameters are added to the command, the name of the active profile is shown. query_propertiesRetrieve any set of properties, on any set of objects of the specified type. query_remote_read_only_limit_stateQuery the MDM’s remote access restriction state. If the state is enabled, remote users may only issue read-only commands to the MDM. If the state is disabled, all command types may be issued to the MDM by remote clients. query_system_limitsRetrieve information about the system limits. query_upgradeRetrieve information about the upgrade process. refresh_mdm_cluster_capabilitiesRefresh the exposed cluster node capabilities. remove_standby_mdmRemove a standby MDM or standby Tie Breaker, that is not part of the cluster, from the system. rename_mdmRename an MDM Cluster node. rename_systemName or rename the system. replace_cluster_mdmReplace members of the MDM cluster. Up to half (rounded down) of the cluster members can be replaced at one time. replace_mdm_security_filesReplace the MDM's security certificate and key. The replacement certificate can be either a self-generated and self-signed certificate, or a certificate generated and signed by an external Certificate Authority. Security permissions are required in order to execute this command. set_component_authentication_propertiesEnable or disable component authentication properties. set_management_client_communicationEnable or disable secure communications between the MDM and the management client. set_performance_parametersApply performance profiles to system components. You can apply separate profiles for SDSs, SDCs, the MDM cluster, replication peer systems, and SDRs. start_upgradeStart the upgrade process. switch_cluster_modeSwitch the MDM cluster from one operating mode or configuration to another. switch_mdm_ownershipSwitch MDM cluster ownership from the current Master MDM to a different MDM.