Dell EMC VxBlock™ and Vblock™ Systems 200 and 240 Software and Firmware Upgrade Guide This document describes how to upgrade a VxBlock System 240, Vblock System 240, or Vblock System 200 from one RCM release to another within in the same RCM train, such as release 6.5.1 to 6.5.2. See the RCM Portal on the Dell EMC Technical Resource Center for supported RCM releases for the platforms. The audience for this document includes sales engineers, field consultants, advanced services specialists, and customers who need to upgrade a VxBlock System 240, Vblock System 240, or Vblock System 200. See the following table for information about other upgrade instructions: To upgrade this product See this document VMware vSphere 6.0 or 6.5 to 6.7 Dell EMC Upgrade Guide from VMware vSphere 6.5 to VMware vSphere 6.7 VMware vSphere 6.0 to 6.5 Dell EMC Upgrade Guide from VMware vSphere 6.0 to VMware vSphere 6.5 VMware vSphere 5.5 to 6.5 Dell EMC Converged Systems Upgrade Guide from VMware vSphere 5.5 to VMware vSphere 6.5 VMware vSphere 5.5 to 6.0 Dell EMC Upgrade Guide from VMware vSphere 5.5 to VMware vSphere 6.0 Vision™ Intelligent Operations Upgrade to VxBlock Central. See the Architecture Overview for your Converged System and the Dell EMC VxBlock Central Upgrade Guide for information. VxBlock Central Dell EMC VxBlock Central Upgrade Guide Important: The RCM 6.5 train, which supports VMware vSphere 6.5 does not support the Cisco Nexus 1000V Switch. Dell EMC recommends migrating virtual environment to the VMware Distributed Virtual Switch before the vSphere 6.5 upgrade. Refer to the Glossary for terms, definitions, and acronyms.