Configure SNMP for CloudLink Center This chapter provides information about SNMP traps and configuring them in CloudLink Center. CloudLink Center can send Simple Network Management Protocol (SNMP) traps to a single target when CloudLink alarms are raised, updated, or lowered. Each server in a CloudLink cluster must be configured separately, because cluster members do not synchronize SNMP configuration. If a CloudLink alarm is set to Ignored, then SNMP traps are not sent for that alarm. Child TopicsChange SNMP configuration in CloudLink CenterUse this procedure to change the SNMP configuration in CloudLink Center. Send test SNMP trap in CloudLink CenterUse this procedure to test your SNMP configuration to ensure that the target receives SNMP traps from CloudLink Center. Download MIB filesUse this procedure to download the MIB file. Import or upload the MIB file to the trap receiver or network management system application. CloudLink alarms use the Object Identifier (OID) 184.108.40.206.4.1.1139 for traps.