Change SNMP configuration in CloudLink Center

Use this procedure to change the SNMP configuration in CloudLink Center.

Procedure

  1. Log in to CloudLink Center.
  2. Click Server > SNMP > Change Configuration. The Change SNMP Configuration dialog box is displayed.
  3. From the Target Version list, select SNMPv2 or SNMPv3.
    • If you select SNMPv2, then enter the following values:
      • Host—The IP address or FQDN to where the SNMP traps are sent.
      • Port—The receiving host port number
      • Community—The SNMP trap community
    • If you select SNMPv3, then enter the following values:
      • Host—The IP address or FQDN to where the SNMP traps are sent.
      • Port—The receiving host port number
      • Engine ID (HEX)—The remote SNMP protocol engine identifier. This value must be between five and 32 octets in length.
      • (Mandatory) User Name—The username is required to communicate with the SNMP agent.
      • (Optional) Authentication Type—Specifies the type of authentication used
      • Authentication Password—Password used to authenticate a connection with an SNMP agent. Must be at least eight characters in length.
      • (Optional) Privacy Type—Specifies the type of encryption used
      • Privacy Password—Password used to encrypt a connection with an SNMP agent. Must be at least eight characters in length.
  4. Click Change.