Managing networking resources Child TopicsCreate a named VLAN on both FIsAdd a named VLAN to both FIs in the Cisco UCS instance to connect to a specific external LAN. Set VLAN on vNIC templates to nativeSet VLAN 110 (vcesys_esx_build) on vNIC templates to native. Add a VLAN to a service profile templateAdd a VLAN to a service profile template for both Ethernet interfaces. Add a VLAN to the Cisco Nexus switchesAdd a VLAN to the Cisco Nexus switches using Cisco NX-OS commands. Remove a VLAN from the Cisco Nexus series switchesRemove a VLAN from the Cisco Nexus switches using Cisco NX-OS commands. Configure an AMP-3S trunk port Configure all the default and Logical Configuration Survey (LCS) defined VLAN IDs on the trunk ports. Refer to Default VLANs and parameters (Cisco Nexus management and management aggregation switches) for the VLAN list. Configure a vPCUse any available Ethernet port to form a Cisco vPC enabled port channel on Cisco Nexus switches. Delete a vPCDelete a vPC from the Cisco Nexus switch. Add VLANs to a vPCVLANs can be added to the trunk of an existing Cisco vPC when it is modified on the Cisco Nexus series switch. Remove VLANs from a vPCVLANs can be removed from the trunk of a Cisco vPC. Add VLANs to vPCs for Disjoint Layer 2 networksAdd VLANs to vPCs for Disjoint Layer 2 networks to define the VLANs that pass over specific uplinks. View VLANs assigned to vPCs for Disjoint Layer 2 networksVerify VLANs have been assigned to vPCs. Upgrade Cisco Nexus switch softwareUpgrade the system image on the Cisco Nexus 9000 Series Switches. Downgrade Cisco Nexus switch softwareDowngrade Cisco Nexus switch software to restore the original version after a failed upgrade. Use Cisco DCNM Cisco DCNM is installed as part of the AMP-VX management suite. Manage VMware NSXFor information about managing VMware NSX, see the VMware NSX for vSphere Administration Guide.